Description

170 ton at first layer, speed 0 –20 m/min
60 ton at last layer, speed 0 –40 m/min
Capacity: 1800m 8” rope or 7000m 3”steel wire
Water cooled brake resistors
Wire/Rope spooling device
Motor Control and local Control Panel (radio)
Remote Control Console
Low voltage VFD Single drive system
Recommended spare parts for five year operation
HPU Electric motors: 2 x ABB/Siemens/ Franz Wolfer/VEM
350KW per unit, heater build-in motor
IP56, S1 continuous duty, insulation class F
Electrical general: Ambient temp. 50 deg C
Voltage440V/660V, frequency60Hz
Winch Band Brake: Hydraulic set on drum flange with stainless steel(AISI 316L) lining of min 5 mm thickness
Brake Capacity: 200ton@first layer / 80ton@last layer
Brake torque is set 50% by spring load and 50% by hydraulic
Emergencyquickreleaseand freewheeling
Piping: Hot dipgalvanized, under 35 mm in stainlesssteel.
Comes sandblasted and painted for marine use.
Net weight: 108.5 ton

All details given in good faith, without guarantee
LOA 1 m

Built in year 2019

Bollard Pull : 170 tons

Specifications

Certification

REGISTERED Achilles Member:
- UVDB Registered
- CONNEXIO Accredited
- SELLIHCA Qualified

MEMBER Renewable Energy Hamburg
MEMBER Bundesverband Windenergie
MEMBER Windenergie Agentur Bremerhaven
MEMBER Windenergy Network

Disclaimer

GRS performs its services exclusively on the basis of its General Terms and Conditions, which are available at the GRS website www.grs-offshore.com.
All details are given in good faith but without guarantee. Subject to availability.

Location Map